Doremi ShowVault / IMB Bedienungsanleitung

IMB.DP.003389.DRM Page 1 of 16 Version 1.2 Doremi Labs Dual IMB Installation and Configuration Procedure With Software 2.4.x Version 1.2

IMB.DP.003389.DRM Page 10 of 16 Version 1.2 Doremi Labs 5 Playlist Creation Follow the steps below to create a Show Playlist (SPL). Note: This is

IMB.DP.003389.DRM Page 11 of 16 Version 1.2 Doremi Labs  From the drop-down, select 3D or 2D for Display Mode, depending on the nature of the SP

IMB.DP.003389.DRM Page 12 of 16 Version 1.2 Doremi Labs Figure 13: 4K Setting  Double-click on the Black element (Figure 10). o For 2D HFR and

IMB.DP.003389.DRM Page 13 of 16 Version 1.2 Doremi Labs Figure 15: 3D SPL Example Figure 16: 2D SPL Example This is the end of the setup proced

IMB.DP.003389.DRM Page 14 of 16 Version 1.2 Doremi Labs 6 KDM Information In Dual IMB setups, encrypted content requires that the KDM being gener

IMB.DP.003389.DRM Page 15 of 16 Version 1.2 Doremi Labs 7 Acronyms Term Definition DLM Doremi License Message HFR High Frame Rate KDM Key Delive

IMB.DP.003389.DRM Page 16 of 16 Version 1.2 Doremi Labs 8 Document Revision History Date Revision Description 08/22/2013 1.0 First version of doc

IMB.DP.003389.DRM Page 2 of 16 Version 1.2 Doremi Labs Table of Contents 1 Introduction ...

IMB.DP.003389.DRM Page 3 of 16 Version 1.2 Doremi Labs 1 Introduction This document describes the necessary steps to install and configure the two

IMB.DP.003389.DRM Page 4 of 16 Version 1.2 Doremi Labs 2 Required Materials  1 ShowVault  1 IMB-SM  1 IMB-LD  2 Series-2 Digital Cinema Pr

IMB.DP.003389.DRM Page 5 of 16 Version 1.2 Doremi Labs 3 Installation and Power-Up Sequence Installation:  Verify that both projectors and the S

IMB.DP.003389.DRM Page 6 of 16 Version 1.2 Doremi Labs 4 Device Manager Configuration To configure the ShowVault to operate in a Dual IMB setup, t

IMB.DP.003389.DRM Page 7 of 16 Version 1.2 Doremi Labs Figure 3: Device Manager Figure 4: HFR 3D Primary Projector  Add the Secondary Projecto

IMB.DP.003389.DRM Page 8 of 16 Version 1.2 Doremi Labs  Note: For HFR setups, select Right from the Display mode drop-down (Figure 6). o Click

IMB.DP.003389.DRM Page 9 of 16 Version 1.2 Doremi Labs Figure 7: Certainty Added  Add a Raw device by clicking the Add button and selecting Raw