Doremi TMS Bedienungsanleitung

TMS3Theater Management SystemUser Manual Version 1.4 TMS.OM.000177.DRM Page 1 of 106 Version 1.4

2.2.3 Software InstallationFollow the procedure below:Method 1 – Via FTP• Copy the package to the following directory on the TMS server:• Using an FTP

Figure 125: Theater Properties – Theater Tab7.14.2 Contacts TabThe following information can be added to the Contacts Tab:• Name• Country Code• Phone

Figure 126: Theater Properties – Contacts Tab• The user can also delete entries:◦ Click on the desired entry to highlight it (Figure 126).◦ Click on t

7.14.3 Facility InformationThe following information can be added to the Contacts Tab:• Circuit• Facility Name◦ Facility Address◦ City◦ Province◦ Post

7.14.4 Logs TabOnce the required information has been entered and saved, the status of the operations will be displayed in the Logs tab (Figure 128).F

7.16 TLMS License ManagerThe TLMS License Manager application (Figure 130) allows the user to view the available licenses and the number of screens th

8 AcronymsTerm DefinitionCPL Composition PlaylistDCP Digital Cinema PackageGPI General Purpose InputGPO General Purpose OutputKDM Key Delivery Messag

9 Document Revision HistoryDate Version Description09/02/20081.0 First Version.04/08/20091.1 All sections revised.04/08/20101.2 All sections revised

The support team will then provide the required licensing information (DLM plus additional an additional identification file that needs to be ingested

3 GUI OverviewFollow the procedure below:The TMS GUI will automatically launch when logged in as doremi.• To launch the TMS GUI manually, go to the S

4 Quick Start GuideThis quick start guide provides guidance on how to use the TMS GUI in order to configure screens, create and schedule SPLs, check

4.3 Screen SettingFollow the procedure below:• To perform the set up of the screens, click on the Servers icon in the Control Panel tab.• The Server

• To scan for available servers, click on the Scan Network button.◦ The Network Scan window will appear.◦ Select one or more servers to add and then C

4.4 SPL CreationFollow the procedure below:Note: If Show Playlists are complete, then skip this section and proceed to Section 4.5. • Creating a Show

4.4.1 Creating a Show Playlist Pack:Follow the procedure below:• The TMS also allows the creation of re-usable playlist packs. Click on the New button

Figure 6: SPL Pack Added◦ Proceed by adding CPLs, automation cues and trigger cues.◦ Click on the Save button to save the created pack.◦ Confirm the n

4.5 SPL SchedulingTo schedule a Show Playlist playback, follow the steps below: • Go to the Scheduling tab. See Section 6.2 for additional guidance a

Table of Contents1 Introduction...

4.6 Uploading KDMs A Show Playlist might contain encrypted CPLs. To identify an encrypted CPL, look for the lock icon to the left of its name in the

5 Macro EditorA Macro Automation Cue consists of two parts, an Automation Cue and a Trigger Cue. Trigger Cues are explained fully in Section “Trigger

5.1.2 Creating a New MacroTo create a new Macro, follow the procedure below:• Launch the Macro Editor application.◦ Menu → Doremi Apps → Macro Editor•

• To Execute a Macro:◦ Click on the desired Macro to highlight it.◦ Click on the Execute button to execute the selected Macro (Figure 9).◦ Click on th

5.1.4.1 Adding a Projector ActionFollow the procedure below:• Click on the Projector category to highlight it.• Select from the following action items

◦ Channel Switch: Switch the selected projector channel▪ Click on the Add button to add this action item to the Macro.▪ The user can configure the Cha

◦ General Purpose Output: Configure a General Purpose Output (GPO) line.▪ Click on the Add button to add this action item to the Macro.▪ The user can

5.1.4.3 Adding a Playback ActionFollow the procedure below:• Click on the Playback category to highlight it.• Select from the following action items:◦

◦ Video Output Actions: Change the default video output format.▪ Click on the Add button to add this action item to the Macro.▪ The user can configure

◦ RealD SBS: Enable or Disable RealD SBS output format.▪ Click on the Add button to add this action item to the Macro.▪ The user can configure the Rea

6 TMS GUI Tabs Description...406.1 Monitorin

5.1.4.5 Adding Action from the LibraryFollow the procedure below:• Click on the Library category to highlight it.• Select from the following action it

◦ eCNA: Manage eCNA products.▪ Click on the Add button to add this action item to the Macro.▪ The user can select the actions to manage eCNA products

◦ Jnior: Manage Jnior products.▪ Click on the Add button to add this action item to the Macro.▪ The user can select the actions to manage Jnior produc

5.2 Macro Editor – Triggers TabA “Trigger Cue" allows for the execution of a Macro Automation Cue upon the occurrence of an event from an externa

5.2.2 Creating a New TriggerFollow the procedure below:• Launch the Macro Editor application.◦ Menu → Doremi Apps → Macro Editor• Click on the Trigger

◦ The Trigger Settings window will be prompted allowing the user to change the name of the trigger or add any additional comments.◦ Click on the OK bu

◦ Define the line number and value click the Ok button.◦ Click on the Save button to save the configuration (Figure 27).▪ Signal – Configure the setti

5.3 Macro Editor – Remote TabThe TMS macro editor will detect if meanwhile the TMS user is editing the macros something has changed on one or several

Figure 33: Macro Editor Window – Remote Tab – Macro Selected• To reload all Macros:◦ Click on the Reset button (Figure 32).◦ The Macros will reload to

5.5 LogoutTo prevent unauthorized changes to settings and scheduling, click logout.• Go to the Control Panel tab and click on the User icon.• The foll

6.7.2.3 Simple User Rights...786.7.3 Servers ...

6 TMS GUI Tabs Description6.1 Monitoring Tab• To enter the Monitoring tab, click on Monitoring on the top of the GUI.• The Monitoring window is comp

Figure 36: TMS GUI - Monitoring TabNote: The small warning/critical icon can be used to display some other warnings. Point the mouse over the screen i

• Using the mouse to hover over the SPL name or the clip bars will list the content found in the SPL. 6.1.2 Screen InformationThe bottom part will di

• Edit Links button: This will link a specific movie name to an SPL.• Swap Schedules Button: Allows the user to swap schedules between screens.• Copy

6.2.2 Manager/Administrator UseIf the user is logged in as either manager or admin, they will be able to modify the settings. In this tab, it corresp

• The left side provides the list of movies listed in the POS File. This largely depends on whetheror not the Show Playlist is linked with the POS fil

6.3 KDM Overview Tab• To enter the KDM Overview tab, click on KDM Overview Tab on the top of the GUI at any time during the TMS GUI usage.• The KDM O

Figure 43: KDM Highlight Window• To delete a KDM, select it in the KDM list and click the Delete KDM button (Figure 42).• To delete all expired KDMs,

Note: Right clicking on an Uploading of KDM line in the bottom part of the tab will show a menu to clear the status logs or delete the selected messag

6.4.2 ColorsDifferent colors represent different formats in the Show Playlist Builder:• Flat:◦ 2D is dark blue.◦ 3D is light blue.• Scope:◦ 2D is da

8 Acronyms... 1059

Figure 48: Find Content Options• There is also a Sorting Option drop-down list that allows the user to sort the content on the left side of the window

Figure 49: Show Playlist Creation• If the user is trying to add content with different formats, the Dissimilar Content window will appear asking the u

Figure 51: Show Playlist Ingest Window• Select the SPL to ingest and the destination screen, then click on the Start Ingest button (Figure 51).• Click

Figure 53: SPL Name and Display Mode Settings• To hide the SPL Properties window, click on the Close button, See Figure 52.• Click the Save button, lo

Figure 54: Encrypted Content Tag6.4.3.2.2 Automation CuesMacro Automation Cues can be added to an element of the Show Playlist.• Select the element i

• The Macro Automation Cue will appear under the element on the right part of the tab (Figure 56):Figure 56: Automation Cue Added to an Element• This

Figure 57: Trigger Cue Addition – Whole Show Playlist• Select the Macro Automation Cue to associate with the Trigger Cue by clicking on the Automation

Figure 58: Trigger Cue Addition – Single Element6.4.3.2.4 Element RecordingTwo arrows allow the user to change the order of the elements in the Show

6.4.3.2.5 Refresh ButtonsTwo Refresh buttons are available in this tab (Figure 62). • The Refresh Contents List button will do a quick refresh withou

• With Trigger Cues and Automation Cues, the user will be able to edit the properties that were asked for when the element was added to the Show Playl

Software License AgreementThe software license agreement can be found at the following location:http://www.doremilabs.com/support/cinema-support/cinem

The Save window will contain three selections (Figure 64), listed below:• Show Playlists• Playlist Packs• Pack UpdatesFigure 64: Export ButtonWhen the

Figure 65: Show Playlist Saving 6.4.3.5 New Show Playlist• If a new playlist needs to be created, click on the New button (Figure 65). This action

The Open window will also contain three selections on the top of the window:• Show Playlists• Playlist Packs• Pack UpdatesWhen the check-box next to t

• Click the Delete button to perform the deletion.• A user with admin privileges can prevent any other user from deleting specific CPLs by locking it

6.5 Screen Management Tab6.5.1 Tab Overview• To enter the Screen Management tab, click on Screen Management on the top of the GUI.• The Screen Manag

Figure 72: Show Playlist Progress List-box6.5.2 Applying Manager/Administrator AccountsWhen logged in as manager or admin, the user will be able to

6.5.2.1 Pause Mode• To enter Pause mode, click the Pause button (Figure 73).• While being in Pause mode, the user can skip to the previous clip or to

Figure 76: Locate Result • To resume back to playback, click the Play button.6.5.2.2 Show Playlist LoadingThe manager or admin privileges allow the u

6.5.2.3 CPL and SPL Management• When logged in as admin or manager the user will be able to add or delete a SPL and CPL (Figure 77).Figure 77: Screen

• Choose the required Show Playlist and click on Send.• The selected Show Playlist will be added to the screen and the Show Playlists window will be u

1 Introduction1.1 PurposeThe purpose of this user manual is to provide guidance on how to install and use the Doremi Theater Management System (TMS)

6.5.2.3.1 CPL IconsThe following icons represent the following KDM status:• No icon: a 2D not encrypted CPL• - Green lock: a 2D encrypted CPL with va

• To add a new Section click on the New button (Figure 80).• In the new section, the user will be able to add actions to each section (Figure 80).• To

• To remove a section from the list, click on the Edit button in the section to be deleted (Figure 80).• Click on the Remove button on the Modify Sect

6.6 Content Management Tab• To enter the Content Management tab, click on Content Management on the top of the GUI (Figure 84).Figure 84: Content Man

automatically by the TMS. It will not re-start automatically if the associated schedule is deleted from the Scheduling tab.• The user can also pause a

6.6.2 Logs TabThe Log tab shows Ingest logs of the selected screen.Figure 86: Content Management: Logs Tab• The logs tab displays the ingest logs of

6.7 Control Panel Tab6.7.1 Tab Overview• To enter the Control Panel tab, click on Control Panel on the top of the GUI.• The Control Panel tab allows

6.7.2 User Management• To change the user, double-click on the User icon (Figure 89).Figure 89: Authentication Window• Choose the appropriate user-na

6.7.2.3 Simple User Rights• When not logged in as either admin or manager, only the available functions are possible: ◦ Upload KDM◦ Refresh◦ Create a

◦ Select the desired server in the server list and click on the Remove Server button.◦ Click Save to validate the operation.Note: If the Confirm Passw

2 Installation2.1 System RequirementsThe minimum system requirements are listed below:• 4GB of RAM.• CPU: Quad core 3Ghz.• OS hdd: >= 120GB•

• Use the Browse button to define the POS file location.• The frequency at which the POS file is to be inspected is to be defined in the Refresh Infor

6.7.5.1 Monitor TabTo see the progress of items being ingested, click on the Monitor tab (Figure 95). It will provide a description of the ingest, wh

6.7.6 Disk Cleanup The Disk Cleanup tool scans for any incomplete CPL packages or orphan asset files. The Disk Cleanup tool helps with freeing up dis

6.7.7 Log Report GenerationThe user will need to be logged in as admin to generate log reports of the TMS.• After selecting the Generate Report butt

6.7.8 Multiplex Macro ExecutionThe Multiplex Macro Execution feature allows the user to schedule a macro cue on all screens simultaneously. • Click o

7 LMS Control PanelTo access the LMS Control Panel, go to Menu → LMS Control Panel.• The following window will appear (Figure 104):Figure 104: Contr

Figure 106: New User Creation - Information Window• Define the privileges of the new user by listing the account as: ShowManager, Administrator, Proje

Figure 108: Account Manager Window - New User Added• To edit an account, select the account and then click on Edit (Figure 109).Figure 109: Informatio

7.2 Applications ConfigurationThe Applications Configuration feature allows the user to set the parameters for log retrieval, the TMS GUI, and the TM

7.3 Content ManagerThe content manager displays the information regarding the following:• Disk Space• CPL's• KDM's• Licenses• Asset CountFig

2.2 Installation Procedure2.2.1 OS InstallationFollow the procedure below:1. The client should download the ISO image of Linux “Centos 5.8 32bits” fro

• Browse Contents Button: Allows the user to go back to the home page or switch through CPL's, KDMS's, SPL's, and License windows (Figu

7.3.1.3 SPL WindowFigure 114: Content Manager – SPL• Browse Contents Button: Allows the user to go back to the home page or switch through CPL's,

• Browse Contents Button: Allows the user to go back to the home page or switch through CPL's, KDMS's, SPL's, and License windows (Figu

• The user will be able to view the progress of the export on the Export Progress window.◦ To view the progress:▪ Click on the Progress button on the

◦ Select the desired location to save the report.Figure 118: FLM Manager Window7.6.2 Automated FLM-X Report Generation and ExportThe TMS can be config

Figure 119: Log Manager Window7.7 Language SetupThis feature allows the user to select their desired language. • Select the drop down menu button (Fig

Figure 121: Log Manager• Click the New button to add a new server.• Check the Enable box to make sure that the server becomes active, i.e., logs will

• Enter the username and password required for authentication to the FTP site.• The Home Directory field indicates the folder into which the files wil

7.10 Netmap EditorThe Netmap Editor icon serves the same function as the Servers icon in the TMS Control Panel. For more information on this function

• Click the Statically Set option to activate the Manual IP Address Setting fields.• With assistance from your IT administrator, fill out the fields a