Doremi CaptiView Bedienungsanleitung PDF herunterladen (Seite 23)

D2K.DP.000469.DRM Page 23 of 27 Version 2.1

Doremi Labs

4.3 Upgrading the SB430-10 Software

There are two ways to upgrade the software on the AccessLink or CaptiLink. One way is to use

an FTP client (e.g., Core FTP or Filezilla) and the other is to use a USB flash drive to perform

the upgrade.

4.3.1 FTP Client

 Make sure that an FTP client is installed on the computer.

 Turn the SB430-10 on and make sure it is able to ping to the network.

 Open the FTP client and connect using the IP of the AccessLink or CaptiLink under port

21. Login as the root user and enter the appropriate password.

 Add the update package (".pkg file") to the folder, "/doremi/etc/rc.once," and then

reboot.

 To check if the upgrade was successful, open an SSH session and type the following

command: 'more /doremi/etc/version' and make sure that the version matches that of

the ".pkg" file.

4.3.2 USB Flash Update

 Create a folder in the USB drive and name it doremi, then inside the doremi folder

create another folder and name it "update." For example, '/doremi/update/.'

 Copy the ".pkg" file to the path of the USB flash '/doremi/update/' then safely unmount

the USB flash drive.

 Put the USB flash drive in place of the CaptiView transmitter. Wait for the light to stop

blinking and then do a reboot or power cycle.

 To check if the upgrade was successful, open an SSH session and type the following

command: more /doremi/etc/version and make sure that the version matches that of

the ".pkg" file.

4.4 Changing the Auditorium on the SB430-10

 Connect to the AccessLink or CaptiLink via ssh session.

 Login as username root.

 Type: echo -n aud_number > /doremi/etc/s430-10/audi.conf and then press the Enter

key.

 Reboot for the changes to take effect.

1 2 ... 18 19 20 21 22 23 24 25 26 27

Keine Kommentare

Doremi CaptiView Bedienungsanleitung Seite 23