Doremi CaptiView Bedienungsanleitung PDF herunterladen (Seite 7)

3 Configuration

Use the steps below to fully configure the CaptiLink device.

3.1 Network Configuration

3.1.1 Network Configuration via USB

This method should be used to “rescue” the device in case the IP address is lost.

Note: The steps in this section can only be performed on software versions 1.0.10 and higher.

To update the network configuration with a USB flash drive:

1) Create a directory called "doremi" at the root of the USB key.

2) Create a directory called "update" inside the /doremi directory.

3) Create a directory called "network" inside the /doremi/update directory.

4) Create a file and name it “ifconfig” with the following format. Replace items in bold with

your desired settings.

interface: eth0

ip: 42.0.0.1

mask: 255.255.255.248

gateway: 42.0.0.6

5) Create a file and name it “ntp” (optional) with the following format. Replace items in bold

with your desired settings.

NTPSERVERS="server1.ntp.org server2.ntp.org"

6) Create a file and name it “dns” (required for NTP) with the following format. Replace

items in bold with your desired settings.

nameserver 172.17.16.1

nameserver 8.8.8.8

search rnd.doremilabs.fr

domain rnd.doremilabs.fr

Warning: When creating these configuration files, make sure that the files do not have any

extensions (e.g., .txt, .doc, etc.), which are the default for some operating systems.

7) Place all three files that were created into /doremi/update/network/.

8) On the CaptiLink, remove the CaptiView Transmitter and plug in your USB key, and wait

for one minute. Then reboot the box with the USB plugged in. Wait 2 minutes without

any USB activity (watch your USB key LED to know), and then remove the USB.

Replace the USB flash drive with the CaptiView Transmitter, and reboot the device.

Note: The files on USB flash drives are never moved or changed by the product.

CTL.OM.002498.DRM Page 7 Version 1.0

Doremi Cinema LLC

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Doremi CaptiView Bedienungsanleitung Seite 7